SemFio Networks

  • Home
  • About SemFio Networks
  • Services
  • Products
  • Training
  • Contacts
  • Blog
  • Home
  • About SemFio Networks
  • Services
  • Products
  • Training
  • Contacts
  • Blog

Free Space Path Loss Diagrams

4/1/2018

10 Comments

 
​Free Space Path Loss (or FSPL) represents the amount of energy that a given radio wave loses as it travels through the air away from its source.  Understanding FSPL will help us understand how far a Wi-Fi signal can go. It is also widely used by Wi-Fi survey tools to predict Wi-Fi signal propagation.

It is something that we can calculate by applying this mathematical formula (d in km and f in GHz):
Picture
FSPL is not specific to Wi-Fi waves, it can be applied to any other waves using other frequencies.

In a Wi-Fi environment, FSPL refers to the amount of power a Wi-Fi signal losses as it travels away from the transmitter (it can be an AP or a station).

This loss is relative to 2 main components:
  • Frequency
  • Distance

The following diagram shows exactly how much energy a Wi-Fi wave will lose as it travels away from an AP:
Picture

Frequency

Let’s start with frequency. Here, we are talking about the frequency of the radio wave.  As you can see in the formula above, the higher the frequency is, the higher the loss will be. In Wi-Fi, this means that a 2.4GHz signal is less prone to loss than a 5GHz signal. We commonly say that 2.4GHz travels further away than 5GHz.

Another factor is affecting « how far » a Wi-Fi signal is travelling. And this is related to a specific receive characteristic. Any dual band receivers will need 1 antenna to listen to 2.4GHz signals and another one to listen to 5GHz signals. Because the wavelength of a 2.4GHz signal (12 cm) is longer that the one of a 5GHz signal (6 cm), the size of the antenna needs to be bigger. This means that the 2.4GHz receiver will have a larger receive aperture and will be able to better "hear" the incoming signal.

The FSPL formula in Wi-Fi defines that, in the first meter:
  • A 2.4GHz signal is loosing about 40dB
    • Calculation for channel 1: 20log(0.001) + 20log(2.412) + 92.45 = 40.09dB
    • Calculation for channel 11: 20log(0.001) + 20log(2.462) + 92.45 =  40.28dB
    • Calculation for channel 13: 20log(0.001) + 20log(2.472) + 92.45 = 40.31dB
  • A 5GHz signal is loosing about 47dB
    • Calculation for channel 36: 20log(0.001) + 20log(5.180) + 92.45 = 46.74dB
    • Calculation for channel 52: 20log(0.001) + 20log(5.260) + 92.45 = 46.87dB
    • Calculation for channel 100: 20log(0.001) + 20log(5.500) + 92.45 = 47.26dB
    • Calculation for channel 149: 20log(0.001) + 20log(5.745) + 92.45 = 47.64dB
    • Calculation for channel 165: 20log(0.001) + 20log(5.825) + 92.45 = 47.76dB

Distance

​Here, we are talking about the distance travelled by the Wi-Fi wave away from the source. Common sense tells us that it would make sense if the signal was to lose power as it travels away from its source.
The FSPL formula tells us exactly by how much following the inverse square law.

The inverse square law, developed by Isaac Newton, tells us that as the distance from the source doubles, the energy is spread out over 4 times the area. This results in the signal loosing 4 times it's original amplitude. In other words, the Wi-Fi signal is loosing 6dB every time the distance from the source is doubled (This is represented in red in the diagram above).

​
So, if we know the power of our signal leaving the access point, we can calculate how far this signal will go. This is assuming there is no source of attenuation between the transmitter and the receiver.

What happens when we introduce a wall between the transmitter and the receiver?

Introducing a wall

As expected, the wall will attenuate the signal. The FSPL will be applied to the signal as it travels to the wall and away from the wall as explained on this following diagram. The amount of attenuation will depend on the structure of the wall.
Picture
If we know the amount of power that the Wi-Fi signal will have leaving the AP (Equivalent Isotropically Radiation Power or EIRP), we can calculate the size of our desired cell.

Here is an example if we have an AP using an EIRP of 14dBm (or 25mW) for band frequency bands:
Picture
It is now easy for us to see that the 2.4GHz cell will be twice as big at the 5GHz cell if the same EIRP is used.

​In order to obtain the same cell size for both frequency bands, we can offset the EIRP of the 2.4GHz by 7dB. The way we can do it is by decreasing the 2.4GHz transmit power by 7dB. Most Wi-Fi system will only let us increase or decrease transmit power by an increment of 3dB. Therefore, the best we can do it decreasing the 2.4GHz transmit power by 6dB:
Picture

Ressources on FSPL

  • Wikipedia article on Free Space Path Loss: https://en.wikipedia.org/wiki/Free-space_path_loss
  • Effect of Transmit power changes on AP by Nigel Bowden: http://wifinigel.blogspot.ca/2014/11/effect-of-transmit-power-changes-on-ap.html
  • Wi-Fi Free Space Loss Calculator by Nigel Bowden:  http://wifinigel.blogspot.ca/2014/05/wifi-free-space-loss-calculator.html
  • FSPL diagram by Devin Akin: http://divdyn.com/so-called-ghost-frames-not-exist/


written by François Vergès
10 Comments
    Picture

    François Vergès

    François Vergès is the founder of SemFio Networks. As a Network Engineer, he has a real passion for Wi-Fi.

    Picture Picture Picture

    Categories

    All
    5G
    5GHz
    6GHz
    802.11
    802.11ax
    802.11v
    802.1X
    AirConsole
    Aruba
    ArubaOS
    AutoCAD
    Automation
    Brand
    Capture
    Cisco
    Cisco WLC
    CLI
    Cloud
    Co-Channel Contention
    Controller Upgrade
    Course
    CWNE
    CWNP
    Design
    DFS
    Diagrams
    Ekahau
    FreeRADIUS
    Frequencies
    FSPL
    Hotspot
    Ideas
    Industry Canada
    Interference
    ISED
    Jetson Nano
    KRACK
    MagicQuadrant
    MakeWi FiVisible
    MakeWi-FiVisible
    Market
    Mobility Express
    News
    Packet Analysis
    Programming
    Python
    Reference Guide
    Script
    Security
    SemFio
    Site-survey
    Spectrum-analysis
    Technology
    Timeline
    Tip
    Training
    Validation
    Video
    Warehouse
    WiFi
    Wi-FI
    Wi-Fi
    Wi-Fi 6
    Wifitraining
    Wi Fi Troubleshooting
    Wi-Fi Troubleshooting
    Wireshark
    WLAN Pi
    WLPC
    WPA2

    Archives

    December 2019
    October 2019
    August 2019
    July 2019
    June 2019
    April 2019
    January 2019
    December 2018
    November 2018
    August 2018
    May 2018
    April 2018
    March 2018
    January 2018
    December 2017
    November 2017
    October 2017
    September 2017
    May 2017
    April 2017
    February 2017
    January 2017
    November 2016
    September 2016
    August 2016
    May 2016
    April 2016
    March 2016
    February 2016
    December 2015
    November 2015
    September 2015
    August 2015
    July 2015
    April 2015
    February 2015
    January 2015
    December 2014
    November 2014
    October 2014
    September 2014
    August 2014
    June 2014
    May 2014

    RSS Feed

SemFioNetworks-EmailContact SemFioNetworks-LinkedInProfile SemFioNetworks-FacebookPage SemFioNetworks-YoutubeChannel

Let's Talk

Please get in touch with us if you have any questions. We offer a wide variety of professional Wi-Fi services that can help your wireless environment becoming faster, more secure and more efficient!
Get in touch
SemFioNetworks-Logo
Copyright © 2019 by SemFio Networks Inc.